Place the diffuser on an even surface.
Fill the water tank with 240°C - 500C to the max water level shown (max 70ml), then plug in the adaptor.
Add 8-10 drops of AromaWorks Essential Oil into the water, avoiding the splash and essential oil onto the surface of the base. Replace the cover.
Operating Instructions:
Press the button once - continuous mist with LED show red, a continuous mist will be maintained for 1 hour.
Press the button a second time - the guiding light will show green, this mist will start and stop in 15-second intervals.
Press the button a third time - the guiding light will show blue, and continuous mist will be timed for 1 hour.
The Colour Changing Buttons:
Press the button once to turn off.
Press the button a fourth time, the LED lights automatically change colour.
Press the button for 1.5 seconds to change the colour.
Press the button again for 1.5 seconds to turn the light off.
Water Level Warning:
The Aroma Diffuser will automatically stop working when the water is not in the unit, the LED light will flash red until you add water and restart the unit or the power is switched off.
Unplug the power unit, remove the covers, empty the water from the tank (empty water from the unit, not the air hole). Use a damp cloth to wipe the inside of the tank. Do not allow water to get inside the air inlet. Use a cotton bud to clean the air inlet to prevent essential oils building up and furring the ceramic disc. If the ceramic disc becomes clogged with essential oils the unit will not work.
